ACTIVE INGREDIENT:

Pretilachlor………………………………………………………………………………………………………………………………30%

INERT INGREDIENT:………………………………………………………………………………………………………………..70%

TOTAL:100%

For the control of grasses, sedges and broadleaves such as barnyardgrass, Semen Euphorbiae.

HAZARDS IDENTIFICATION OF PREPARATION

Classification of risk of chemical product:

Dangers for the health of the people

Effects of one on acute exposure (short time): Information non-available

Inhalation: May be a mechanical irritant.

Contact with the skin: Repeated dermal contact with the active ingredient may cause skin irritation with itching, burning,redness, swelling or rash.

Contact with the eyes: May cause eye irritation with tearing, pain or blurred vision.

Effects of one on chronic exhibition (long time): Information non-available.

Dangers for the environment: To avoid that the product reaches the water obstacles

Dangers special are of the product: None if it is used suitably.

FIRST AID MEASURES

Skin: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice.

Eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for further treatment advice.

Ingestion: No specific intervention is indicated asthe product is not likely to be hazardous by ingestion. Consult a physician if necessary.

Inhalation: No specific intervention is indicated as the product is not likely to be hazardous by inhalation. Consult a physician if necessary. Have the product container or label with you when calling a poison control center or doctor, or going for treatment.

Antidote: None reported.

APPLICATION RATES

READ THE LABEL BEFORE USE. USING THIS PRODUCT IN A MANNER THAT IS INCONSISTENT WITH THE LABEL MAY BE AN OFFENCE. FOLLOW THE CODE OF PRACTICE FOR USING PLANT PROTECTION PRODUCTS.

SAFETY PRECAUTIONS

Operator Protection

Engineering control of operator exposure must be used where reasonably practicable, in addition to the following personal protective equipment:

WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS), SUITABLE PROTECTIVE GLOVES AND FACE PROTECTION (FACESHIELD) when handling the concentrate.

WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS) AND SUITABLE PROTECTIVE GLOVES when handling the contaminated surfaces.

WEAR SUITABLE PROTECTIVE CLOTHING (COVERALLS) when applying by vehicle-mounted or trailed equipment.

TAKE OFF IMMEDIATELY all contaminated clothing.WASH HANDS AND EXPOSED SKIN before eating and drinking and after work.

If you feel unwell, seek medical advice immediately (show the label where possible).

IN CASE OF CONTACT WITH EYES, RINSE IMMEDIATELY with plenty of water and seek medical advice.

WASH ANY CONTAMINATION from skin immediately.

ENVIRONMENTAL PROTECTION

Do not contaminate water with the product or its container. Do not clean application equipment near surface water. Avoid contamination via drains from farmyards and roads.

STORAGE AND DISPOSAL

KEEP IN ORIGINAL CONTAINER, tightly closed, in a safe place.

WASH OUT CONTAINER THOROUGHLY, empty washings into spray tank and dispose of safely.

DO NOT RE-USE CONTAINER FOR ANY PURPOSE.

DIRECTIONS FOR USE

IMPORTANT: This information is approved as part of the Product Label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

1. Prepare the soil, and then sow seeds in the paddy fields.

2. Spray 1.5L-1.8L of the product and add 30kg water to the fields, keep the aquifers for 3-4days.

NOTE:

1. Sowing and applying in time after soil preparation, or it would be less effective to weeds.

2. Roots and buds must be normal.

RESTRICTIONS OR WARNINGS

DO NOT apply when crop is under stress, such as in frosty weather or when frost is expected, insect attack, manganese deficiency, wind damage or where there is possible check from earlier pesticide treatments.

DO NOT hoe beet crops within 21 days of application as weed control may be reduced.

A period of at least twelve hours without rain should follow spraying otherwise weed control may be reduced.

CONSULT PROCESSORS BEFORE USING ON CROPS RECOMMENDED FOR PROCESSING.

AVOID DRIFT onto neighbouring crops, especially cereal crops.

In some situations Pretilachlor 30% EC may cause yellowing of the foliage of pea crops. This is usually outgrown quickly.

Extreme care must be taken to avoid spray drift on to non-crop plants outside of the target area.

RESISTANCE

A strategy for preventing and managing herbicide resistant grass weeds should be adopted.

Guidelines have been produced by the Weed Resistance Action Group.

• To reduce the risk of developing resistance, applications should be made to young, actively growing weeds. Use only as part of a resistance management strategy that includes:

• Use crop rotation and other cultural control measures to prevent and manage herbicide resistant grass weeds;

• Use of tank/product mixes or sequences of herbicides with different modes of action within individual crops, or successive crops;

• Use of grass weed herbicides with different modes of action throughout the cropping rotation;

• Monitoring of weed control effectiveness and investigation of any odd patches of poor grass weed control. If unexplained, contact your agronomist who may consider a resistance test appropriate;

• Do not use Pretilachlor 30% EC as the sole means of grass weed control in successive crops.

MIXING AND SPRAYING

Pretilachlor 30% EC should be applied as a FINE or MEDIUM spray (as defined by BCPC) in 200-300 litres water per hectare.

Use the higher rate where crop and/or weed is dense and wild oats are present. It is essential to get good coverage of the weeds to get good control.

Ensure the sprayer is clean and in good working order. Calibrate according to sprayer manufacturers' recommendations.

Half-fill the spray tank with clean water and add the required quantity of Pretilachlor 30% EC. Add the remainder of the water and continue agitation until spraying is complete.

RINSE CONTAINER THOROUGHLY by using an integrated pressure rinsing device or manually rinsing three times. Add washings to sprayer at time of filling and dispose of container safely.

Wash out the sprayer thoroughly after use by rinsing three times with water.

DISCLAIMER/CONDITIONS OF SUPPLY

The specified properties of our products and the mode of application stated on this label have been established on the basis of research and experience. Products conform to specification at the time of delivery but, as we exercise no control over their subsequent storage, handling, mixing or use or the weather conditions before, during and after application, all of which may affect the performance of the products, no responsibility or liability will be accepted by us or our re-sellers for any failure in performance, damage or injury to person or property whatsoever arising from the storage, handling, application or use of the products. These conditions cannot be varied by our staff or agents whether or not they supervise or assist in or make recommendations concerning the use of such products. We recommend you contact your dealer to request advice on the suitability of this product for any new and/or unusual growing methods or for new varieties not listed on this label.